Solid Drawn Brass Butt Hinge 64 x 35 x 2mm

To provide a superior structural foundation for high-end joinery and medium-weight internal doors, the 64mm Solid Drawn Brass Butt Hinge is the professional choice for durability and refined operation. Unlike standard “pressed” hinges stamped from thin sheets, these hinges are extruded from solid blocks of brass. This results in a significantly stronger, more precise component with the structural integrity required for solid timber cupboard doors, heavy larders, and bespoke furniture.

Upgrade your joinery with our 64mm Solid Drawn Brass Butt Hinge. 64x35x2mm, extruded brass for maximum strength and precision. Perfect for furniture. Shop now!

Precision Craftsmanship: The 64mm Solid Drawn Brass Butt Hinge

In the world of bespoke woodworking, the 64mm Solid Drawn Brass Butt Hinge (2.5 inches) is prized for its “over-engineered” quality. The “solid drawn” manufacturing process involves extruding brass through a precision die, creating a dense metal structure that resists bending and wear. This process ensures that the hinge leaves are perfectly flat and the pin fit is exceptionally tight, providing a smooth, wobble-free swing that cheaper plated alternatives simply cannot replicate.

Measuring 64mm x 35mm with a substantial 2mm thickness, this hinge is the ideal scale for larger kitchen cabinet doors, bedroom wardrobes, and high-quality internal shutters. Because it is solid brass throughout, it is naturally non-ferrous and rust-proof, making it an excellent choice for premium marine cabinetry or luxury coastal residential projects where salt air would corrode standard steel hardware.

Why the Solid Drawn Brass Hinge is the Professional Choice

• Extruded Structural Strength: The solid drawn process ensures the hinge leaves are incredibly rigid, allowing them to support the weight of solid oak or mahogany doors without “leaf-spread.”

• High-Tolerance Machined Pin: Features a fixed pin machined to exact specifications, ensuring the door maintains its alignment over decades of use and preventing “door sag.”

• Naturally Corrosion-Resistant: Forged from solid brass, these hinges will never rust, peel, or flake. They can be polished to a mirror shine or left to develop a rich, authentic patina over time.

   

• Heavy 2mm Gauge Profile: The 2mm thickness provides a secure “bite” for fixing screws and a robust feel, signaling high-end architectural quality.

   

• Countersunk Screw Holes: Precision-drilled countersinks ensure that fixing screws sit perfectly level with the leaf, preventing “clashing” when the door is closed.

   

• Traditional Aesthetic: The warm, classic tone of real brass complements heritage restoration projects and contemporary “Shaker” kitchens alike.

Technical Specifications of 64mm Solid Drawn Brass Butt Hinge

Professional Installation Tips for Fine Joinery

Achieving a seamless fit with a 64mm Solid Drawn Brass Butt Hinge requires precision tools and careful preparation:

1. Scribe the Mortice: Use a sharp marking knife to trace the perimeter of the hinge leaf directly onto the timber. This creates a physical “shoulder” for your chisel, preventing the wood from splintering at the edges.

2. Depth Consistency: At 2mm thick, the mortice must be exact. Use a sharp 1-inch chisel to remove the waste wood. If the hinge sits too deep, the door will “bind”; if it sits too proud, it will leave an unsightly gap.

3. Use a Steel Pilot Screw: Brass screws are decorative and soft. Always drill a pilot hole and drive a steel screw of the same size in and out first to “cut” the thread in the timber. This prevents the brass screw heads from snapping during final assembly.

4. Centering the Fixings: Use a self-centering “Vix” bit to ensure your screw holes are perfectly centered. Even a 0.5mm deviation can pull the hinge out of alignment, causing the door to sit crookedly.

5. Final Protection: Once the installation is complete, apply a thin layer of microcrystalline wax to the brass. This protects the finish from fingerprints and oxidation during the final handover of the project.

The Foundation of Heritage Quality

The 64mm Solid Drawn Brass Butt Hinge is an essential component for projects where the “feel” of the hardware is as important as the function. It offers the tactile weight and silent operation that defines high-quality furniture and internal joinery. By selecting a solid drawn hinge, you are ensuring your cabinetry is supported by hardware designed to last as long as the timber itself.

This 64mm Solid Drawn Brass Butt Hinge, sized 64 x 35 x 2mm, is a robust and versatile hinge ideal for cupboards, cabinets, small doors, and furniture projects. Manufactured from high-quality solid brass, it provides excellent durability, resistance to corrosion, and a polished finish that enhances both traditional and modern interiors. The precision-engineered design ensures smooth movement and dependable long-term performance.

Perfect for joiners, furniture makers, and DIY users, this 64mm Solid Drawn Brass Butt Hinge is straightforward to install and suitable for both new fittings and repair work. Its compact yet strong construction delivers reliable support, while the timeless brass appearance adds an elegant detail to your project. Combining strength, style, and functionality, the 64 x 35 x 2mm solid drawn brass butt hinge is a practical solution for a wide range of applications.