To provide a premium finishing touch for high-end cabinetry and traditional furniture, the 50mm Solid Drawn Brass Butt Hinge is the craftsman’s choice for durability and refined operation. Unlike standard “pressed” hinges that are stamped from thin sheets, these hinges are extruded from solid blocks of brass. This results in a significantly stronger, more precise component with the structural integrity required for solid timber doors and heavy-use cupboards.

In professional woodworking, the 50mm Solid Drawn Brass Butt Hinge (2 inches) is prized for its “over-engineered” quality. The “solid drawn” manufacturing process involves extruding brass through a precision die, creating a dense metal structure that resists bending and wear. This process ensures that the hinge leaves are perfectly flat and the pin fit is exceptionally tight, providing a smooth, wobble-free swing that cheaper alternatives simply cannot replicate.

Measuring 50mm x 28mm with a robust 1.5mm thickness, this 50mm Solid Drawn Brass Butt Hinge is the ideal scale for kitchen larder doors, bedroom wardrobes, and bespoke furniture pieces. Because it is solid brass throughout, it is naturally non-ferrous and rust-proof, making it an excellent choice for premium marine cabinetry or luxury coastal residential projects where salt air would corrode standard steel hardware.

Why the Solid Drawn Brass Hinge is the Professional Choice

Extruded Strength: The solid drawn process ensures the hinge leaves are incredibly rigid, allowing them to support the weight of solid oak or mahogany doors without “leaf-spread.”
High-Tolerance Pin: Features a fixed pin machined to exact specifications, ensuring the door maintains its alignment over decades of use and preventing the common “door sag.”
Naturally Corrosion-Resistant: Forged from solid brass, these hinges will never rust, peel, or flake. They can be polished to a mirror shine or left to develop a rich, authentic patina over time.
1.5mm Gauge Profile: The substantial thickness provides a secure “bite” for fixing screws while remaining slim enough for a discreet, flush-fit mortice.
Countersunk Screw Holes: Precision-drilled countersinks ensure that fixing screws sit perfectly level with the leaf, preventing “clashing” when the cabinet door is closed.
Traditional Aesthetic: The warm, classic tone of real brass complements heritage restoration projects and high-end contemporary painted kitchens alike.

Technical Specifications of 50mm Solid Drawn Brass Butt Hinge

Feature	Specification
Height	50mm (2 Inches).
Open Width	28mm.
Thickness	1.5mm (Robust Profile).
Material Build	Solid Drawn (Extruded) Brass.
Pin Type	Fixed Pin (Non-Removable).
Finish	Self-Colour Natural Brass.
Pack Size	Available in Pairs or Bulk Project Packs.

Professional Installation Tips for Fine Joinery

Achieving a seamless fit with a 50mm Solid Drawn Brass Butt Hinge requires precision tools and careful preparation:

Scribe the Mortice: Use a sharp marking knife to trace the perimeter of the hinge leaf directly onto the timber. This creates a physical “shoulder” for your chisel, preventing the wood from splintering at the edges.
Depth Consistency: At 1.5mm thick, the mortice must be exact. Use a sharp 3/4-inch chisel to remove the waste wood. If the hinge sits too deep, the door will “bind”; if it sits too proud, it will leave an unsightly gap.
Use a Steel Pilot Screw: Brass screws are decorative and soft. Always drill a pilot hole and drive a steel screw of the same size in and out first to “cut” the thread in the timber. This prevents the brass screw heads from snapping during final assembly.
Centering the Fixings: Use a self-centering “Vix” bit to ensure your screw holes are perfectly centered. Even a 0.5mm deviation can pull the hinge out of alignment, causing the door to sit crookedly.
Final Protection: Once the installation is complete, apply a thin layer of microcrystalline wax to the brass. This protects the finish from fingerprints and oxidation during the final handover of the project.

The Foundation of Heritage Quality

The 50mm Solid Drawn Brass Butt Hinge is an essential component for projects where the “feel” of the hardware is as important as the function. It offers the tactile weight and silent operation that defines high-quality furniture. By selecting a solid drawn hinge, you are ensuring your cabinetry is supported by hardware designed to last as long as the timber itself.

This 50mm Solid Drawn Brass Butt Hinge, measuring 50 x 28 x 1.5mm, is a durable and versatile hinge suitable for cabinets, cupboards, small doors, and fine joinery projects. Crafted from high-quality solid brass, it provides excellent strength, corrosion resistance, and a polished appearance that complements both classic and modern furniture designs. The precision-engineered construction ensures smooth and reliable operation for long-term use.

Perfect for furniture makers, carpenters, and DIY enthusiasts, this50mm Solid Drawn Brass Butt Hinge is easy to install and designed for both practical function and aesthetic appeal. Whether used for new builds, repairs, or refurbishments, it delivers dependable performance while adding a touch of timeless brass detail. Combining durability, style, and ease of use, the 50mm Solid Drawn Brass Butt Hinge is an ideal choice for a wide range of applications.